3D Printer Controller Pack (Mega 2560 + RAMPS 1.4 + A4988 Drivers + LCD)
3D Printer Controller Pack (Mega 2560 + RAMPS 1.4 + A4988 Drivers + LCD) - Image 2
3D Printer Controller Pack (Mega 2560 + RAMPS 1.4 + A4988 Drivers + LCD) - Image 3
3D Printer Controller Pack (Mega 2560 + RAMPS 1.4 + A4988 Drivers + LCD) - Image 4
3D Printer Controller Pack (Mega 2560 + RAMPS 1.4 + A4988 Drivers + LCD) - Image 5
3D Printer Controller Pack (Mega 2560 + RAMPS 1.4 + A4988 Drivers + LCD) - Image 6

3D Printer Controller Pack (Mega 2560 + RAMPS 1.4 + A4988 Drivers + LCD)

$105.42 Inc. GST

This is a great pack that includes everything needed to provide control to a 3D Printer. Included in the pack are:

LCN: H06 SKU: ELEC-3D-RAMPS1.4-CONTROL-PACK Categories: , Tags: , , , , , , , ,

Available on backorder

Description

This is a great pack that includes everything needed to provide control to a 3D Printer. Included in the pack are:

3D Printer Controller RAMPS 1.4

The RAMPS 1.4 board is designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Arduino Mega with the powerful Arduino MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an Arduino MEGA shield for easy service, part replacement, upgrade-ability and expansion. Additionally, a number of Arduino expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack.

Arduino-Compatible Mega 2560 R3

Fully compatible with original Arduino MEGA 2560 R3, with this product, you are able to use all the Arduino open source platform to create or learn interactive objects, it will be a lot of fun while you are creating and learning it, so just get this and start it. Compared to the UNO R3, Mega has a ATmega2560 as its main processor, with more I/O Pins, and additional 10 PWM output, of course, the EEPROM is also with larger space.

This board uses the CH340 USB to serial chip. You may need to download the latest CH340 driver:

Read more here:

A4988 StepStick Compatible Stepper Motor Driver Module

A4988 driver is a carrier board or breakout board for Allegro’s A4988 DMOS Micro stepping driver with translator and overcurrent protection. This stepper motor driver lets you control one bipolar stepper motor at up to 2A output current per coil.

RAMPS LCD12864 controller

The Smart Controller contains a SD-Card reader, an rotary encoder and  a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the “smart adapter” included.

After connecting this panel to your Ramps you don’t need your PC any more, the Smart Controller supplies power for your SD card. Furthermore, all actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller. Print your 3D designs without a PC, just with a g-code design stored on the SD card.

 

Pack Details:

  • 1 x Mega 2560 R3
  • 1 x RAMPS 1.4
  • 1 x USB Cable
  • 5 x A4988 Driver with heatsink
  • 1 x 12864 LCD Control Panel / SD Card Reader
  • 1 x LCD Adapter
  • 1 x set of Ribbon Cables to connect your Smart Controller to your RAMPS board

 

More Information:

 

 

Additional information

Weight .15 kg
Dimensions 20 × 12 × 5 cm

Related products