Description
ESP32 CAM and Interface Board (ESP32-S) makes it easy to add a camera to your Internet of Things (IoT) projects. The onboard ESP32-S chip has plenty of power to stream video or take photos of your projects over the internet. The included programming board makes it easy to program the controller with a micro-USB cable. The ESP32 boards are always a good addition to your projects, you can also check out the ESP32 Development Board for other applications of the ESP32.
Features:
- 802.11b/g/n Wi-Fi.
- Bluetooth 4.2 with BLE.
- UART, SPI, I2C and PWM interfaces.
- Clock speed up to 160MHz.
- Computing power up to 600 DMIPS.
- 520 KB SRAM plus 4 MB PSRAM.
- Supports WiFi Image Upload.
- Multiple Sleep modes.
- 9 GPIO ports.
- Built-in Flash LED.
- 4 MByte SPI Flash.
- 448 KByte ROM.
- 520 KByte SRAM.
- Supply Voltage (VCC): 5V.
ov2640 Camera Specifications:
- 2 Megapixel sensor
- Array size UXGA 1622×1200
- Output formats include YUV422, YUV420, RGB565, RGB555 and 8-bit compressed data
- Image transfer rate of 15 to 60 fps
WiFi Specifications:
- 802.11 b/g/n/e/i
- 802.11 n (2.4 GHz), up to 150 Mbps
- 802.11 e: QoS for wireless multimedia technology.
- WMM-PS, UAPSD
- MPDU and A-MSDU aggregation
- Block ACK
- Automatic Beacon monitoring/scanning
- 802.11 Security features: pre-authentication and TSN
- Wi-Fi Protected Access (WPA)/WPA2/WPA2-Enterprise/Wi-Fi Protected Setup (WPS)
- Infrastructure BSS Station mode/SoftAP mode
- Wi-Fi Direct (P2P), P2P Discovery, P2P Group Owner mode and P2P Power Management
- UMA compliant and certified
- Antenna diversity and selection
Bluetooth Specifications:
- Compliant with Bluetooth v4.2 BR/EDR and BLE specification
- Class-1, class-2 and class-3 transmitter without external power amplifier
- Enhanced power control
- +10 dBm transmitting power
- NZIF receiver with -98 dBm sensitivity
- Adaptive Frequency Hopping (AFH)
- Standard HCI based on SDIO/SPI/ High-speed UART HCI, up to 4 Mbps
- BT 4.2 controller and host stack
- Service Discover Protocol (SDP)
- General Access Profile (GAP)
- Security Manage Protocol (SMP)
- Bluetooth Low Energy (BLE)
- BLE Beacon
- A2DP/AVRCP/SPP, HSP/HFP, RFCOMM
- CVSD and SBC for audio codec
- Bluetooth Piconet and Scatternet
Pinout Diagram:
Documentation:
Note:
- This board uses the CH340 USB to serial chip. You may need to download the latest CH340 driver: http://www.wch.cn/download/CH341SER_ZIP.html
- Read more here: http://www.microcontrols.org/arduino-uno-clone-ch340-ch341-chipset-usb-drivers/
- This controller uses a micro-USB cable. (Not included)
