Description
Up cut end mills are the most common type of end mill. They tend to ‘pull’ material up and out of the milled slot. This commonly leaves a smooth finish at the bottom and a slight burr at the top of the material being processed. The MakerBits range of 2 flute up-cut end mills are well suited for general purpose and specialized milling, making them a very versatile tool in the workshop.
Specifications
The specifications for each variation are shown below.
- Material: Solid Carbide – Uncoated
| End mill Type | Number of flutes | Cutting Edge Diameter (CED) | Cutting Edge Length (CEL) | Overall Length (OVL) |
| Up-Cut | 2 | 1mm | 4mm | 38mm |
| Up-Cut | 2 | 2mm | 12mm | 38mm |
| Up-Cut | 2 | 3.175mm | 17mm | 38mm |
| Up-Cut | 2 | 6mm | 25mm | 60mm |
Suitable Materials
- Soft/Hard Woods: Balsa, pine, MDF, Ply
- Soft/Hard Plastics: Cast Acrylic, HDPE, ABS, PVC
End Mill Libraries.
Download our end mill libraries for Fusion360 and Vectric below!
Fusion360
Vectric:
Tips and tricks
- Due to the tendency of the workpiece to be pulled upwards during milling, please ensure that the workpiece is sufficiently clamped.
Please Note:
- Sold individually. Please select the endmill required and quantity.
