Description
Add more power to your robot with this metal-geared MG90S servo. The tiny little servo can rotate approximately 90 degrees (45 in each direction), and works just like the standard kinds you’re used to but smaller. You can use any servo code, hardware or library to control these servos. Good for beginners who want to make stuff move without building a motor controller with feedback & gear box, especially since it will fit in small places. Works great with the Motor Shield for Arduino, a 16-channel Servo Driver, or by just wiring up with the Servo library. Comes with a few horns and hardware.
Please note, this servo will ‘hold’ the position even when no signal is sent!
To control with an Arduino, we suggest connecting the orange control wire to pin 9 or 10 and using the Servo library included with the Arduino IDE (see here for an example sketch). Position “0” (1.5ms pulse) is middle, “90” (~2ms pulse) is all the way to the right, “-90” (~1ms pulse) is all the way to the left.
These high-strength MG90S Arduino microservos are great for all kinds of robotics projects.
Specifications:
- Weight: 13.4g
- Dimension: 22.8×12.2×28.5mm
- Stall torque: 1.8kg/cm (4.8V); 2.2kg/cm (6.6V)
- Operating speed: 0.10sec/60degree (4.8V); 0.08sec/60degree (6.0V)
- Operating voltage: 4.8V~ 6.6V
- Temperature range: 0℃_ 55℃
- Dead band width: 1us
- Power Supply: Through External Adapter
- Servo wire length: 25 cm
- Servo Plug: JR (Fits JR and Futaba)
- Servo arms &screws included and fit with Futaba servo arm
- It’s universal “S” type connector that fits most receivers, including Futaba, JR, Hitec ,GWS, Cirrus, Blue Bird, Blue Arrow, Corona, Berg, Spektrum.
