Description
Down-Cut end mills force the chips downwards into your material which in turn leaves an excellent and smooth top finish but a slight burr at the bottom if you are cutting all the way through the material. Made from high-quality carbide, this endmill is well suited for lettering and engraving woods.
The downwards force created by the end mill onto the material helps with cutting thin sheets of material which tend to be pulled up by up-cut end mills.
Specifications
- Material: Solid Carbide – Uncoated
| End mill Type | QTY Flutes | Cutting Edge Diameter (CED) | Cutting Edge Length (CEL) | Shank Diameter | Overall Length (OVL) |
| Down Cut | 2 | 1mm | 4mm | 3.175mm | 38mm |
| Down Cut | 2 | 2mm | 17mm | 3.175mm | 38mm |
| Down Cut | 2 | 3.175mm | 17mm | 3.175mm | 38mm |
| Down Cut | 2 | 3.175mm | 12mm | 6.35mm | 50mm |
| Down Cut | 2 | 6.0mm | 22mm | 6.0mm | 50mm |
| Down Cut | 2 | 6.35mm | 22mm | 6.35mm | 50mm |
Suitable Materials
- Soft/Hard Woods: Balsa, pine, MDF, Ply
End Mill Libraries.
Download our end mill libraries for Fusion360 and Vectric below!
Fusion360
Vectric:
Tips and tricks
- Debris is packed down into the slot during cutting so a lot of dust is generated. Adequate ventilation and dust extraction are recommended.
- While the down-cut end mills do not try to pull the machine upwards, it is still recommended to clamp your workpiece.
Please Note:
- Sold individually. Please select the endmill required and quantity.
