Description
Our 1 flute end mills are excellent where applications requiring high chip ejection are needed. These endmills are versatile and can be used on a variety of materials. Our 1 flute endmills are polished to reduce the chances of chip-rewelding and therefore giving great cutting performance. For processing aluminium, please have a look at our Aluminium specific end mills here.
Use these endmills with our acrylic sheets.
Suitable Materials
- Soft/Hard Woods: Balsa, pine, MDF, Ply
- Soft/Hard Plastics: Cast Acrylic, HDPE, ABS, PVC
| End mill Type | QTY Flutes | Cutting Edge Diameter (CED) | Cutting Edge Length (CEL) | Shank Diameter | Overall Length (OVL) |
| Up-Cut | 1 | 1.5mm | 7mm | 3.175mm | 38mm |
| Up-Cut | 1 | 2mm | 15mm | 3.175mm | 38mm |
| Up-Cut | 1 | 3.175mm | 17mm | 3.175mm | 38mm |
| Up-Cut | 1 | 6mm | 25mm | 6mm | 50mm |
| Up-Cut | 1 | 6.35mm | 22mm | 6.35mm | 50mm |
End Mill Libraries.
Download our endmill libraries for Fusion and Vectric below!
Fusion360
Vectric:
Tips and tricks
- Due to the geometry of the up-cut end mills, please ensure that the workpiece is sufficiently clamped.
- If you wish to cut soft metals, please have a look at our range for soft metals here.
- For laminated woods, we recommend our straight-cut end mills here.
Please Note
- Sold individually. Please select the endmill required and the quantity.
