Description
Technical Overview
The 90 degree 2 Hole L Bracket – 30 Series M6 is a flat aluminium right-angle bracket for modular 30 series T-slot framing systems. Its L-shaped body includes one M6 fixing hole per arm, providing a low-profile connection at 90 degree joints. As a result, it keeps a minimal footprint where bracket protrusion must be limited or where multiple brackets are spaced along a profile.
Within a modular frame, this bracket also distributes load across both arms for a stable corner connection in lighter structural applications. Unlike box-section cast brackets, its flat plate form sits flush against both profile faces. Builders commonly use it where a simple, lightweight connector is preferred over a heavier cast corner bracket.
Applications
The 90 degree 2 Hole L Bracket – 30 Series M6 connects perpendicular members in 30 series aluminium framing assemblies using M6 cap head bolts and T-nuts. For example, typical applications include shelving units, enclosure panels, lightweight machine frames, workstation accessories, and display structures where a flat corner bracket suits the build better than a heavier cast connector.
In prototype and production builds, it also serves as a reinforcement element at lighter-load intersections. It pairs with 30 series sliding T-slot nuts for quick positioning along the slot. For corners that carry higher loads, the 30 Series 4 Hole L Bracket M6 provides additional fixing points on the same flat L profile.
Technical Specifications
Dimensional Drawing
| A | B | C | D | kg |
|---|---|---|---|---|
| 26 | 30 | 6.3 | 4 | 0.016 |
All measurements are in millimetres
Maker Store Tips and Tricks
-
- Load T-nuts into the extrusion slot before positioning the bracket — slide-in T-nuts must be inserted from the profile end before end access closes.
- Finger-tighten the M6 bolt first, check alignment of the adjoining profile, then fully tighten.
- For higher rigidity on longer spans, use two brackets spaced apart rather than one central bracket.
- For joints subject to vibration, consider using spring washers or thread-locking compound to prevent loosening.
- This bracket suits light-to-medium loads — for heavier corners, use the 30 Series 4 Hole L Bracket M6 or a cast corner bracket.
